Skip to main content
CSE Master
Numerical AbilitySub-Category 2 of 6
11 mins read

Fractions and Decimals

Comparing fractions in seconds (cross-multiplication), mixed numbers, fraction operations, decimal place shifts, and must-memorize fraction-decimal equivalents.

Fractions and Decimals Mastery

Fractions and decimals appear directly in arithmetic drills and inside percentage/word problems. Using cross-multiplication and fraction-decimal equivalents eliminates slow long division.

CSC Exam Tip: To compare which fraction is larger in 3 seconds, cross-multiply upwards! Between 5 / 8 and 7 / 11: left gets 5 × 11 = 55, right gets 8 × 7 = 56. Since 56 > 55, 7 / 11 is larger!

1. Operations on Fractions

Addition and Subtraction (Butterfly / LCD Shortcut)

For two fractions, use the Least Common Denominator (LCD) or quick butterfly formula:

a / b ± c / d = (ad ± bc) / bd

Always reduce your final answer to lowest terms by dividing numerator and denominator by their GCF.

Mixed Numbers

Convert mixed numbers Wn / d into improper fractions (W · d + n) / d before multiplying or dividing:

  • Example: 21 / 4 ÷ 11 / 2 = 9 / 4 ÷ 3 / 2 = 9 / 4 × 2 / 3 = 18 / 12 = 3 / 2 = 11 / 2.

Multiplication (Cancel Diagonally First!)

Multiply numerators straight across and denominators straight across, canceling common factors first to keep numbers small:

14 / 15 × 25 / 21 = 2 / 3 × 5 / 3 = 10 / 9 = 11 / 9

Division ("Keep-Change-Flip")

Multiply the dividend by the reciprocal of the divisor:

a / b ÷ c / d = a / b × d / c = ad / bc

2. Operations on Decimals

  • Addition & Subtraction: Vertically align the decimal points, pad trailing zeros if helpful, then add/subtract normally.
  • Multiplication: Multiply as whole numbers ignoring decimals first, then count the total number of decimal places in both factors (0.12 × 0.4 → 12 × 4 = 48 with 2 + 1 = 3 decimal places ⇒ 0.048).
  • Division by a Decimal: Shift the decimal point of the divisor to the right until it becomes a whole number, and shift the dividend's decimal point the exact same number of places (3.6 ÷ 0.09 = 360 ÷ 9 = 40).

3. High-Yield Fraction–Decimal–Percent Equivalents

Memorizing this table saves 5–8 minutes on exam day:

  • 1 / 2 = 0.5 = 50%
  • 1 / 3 ≈ 0.333 = 33.3̅% | 2 / 3 ≈ 0.667 = 66.6̅%
  • 1 / 4 = 0.25 = 25% | 3 / 4 = 0.75 = 75%
  • 1 / 5 = 0.20 = 20% | 2 / 5 = 0.40 = 40% | 3 / 5 = 0.60 = 60% | 4 / 5 = 0.80 = 80%
  • 1 / 6 ≈ 0.167 = 16.6̅% | 5 / 6 ≈ 0.833 = 83.3̅%
  • 1 / 8 = 0.125 = 12.5% | 3 / 8 = 0.375 = 37.5% | 5 / 8 = 0.625 = 62.5% | 7 / 8 = 0.875 = 87.5%
Active Recall Checkpoint

Lock In What You Just Read

Testing yourself immediately after reading boosts retention by over 50%. Take a quick targeted drill on Fractions and Decimals with step-by-step explanations.

Start Topic Drill
Fractions and Decimals — Numerical Ability Reviewer | CSE Master